Seven Professional Indemnity Mistakes Firms Make When They Start Selling Abroad
Your first overseas contract can quietly fall outside your professional indemnity cover. Check seven mistakes involving territory, jurisdiction, admitted policies and currency before you sign.
Where the Work Happens vs. Where You Get Sued: Mistakes One and Two
Your consultancy has just won its first contract with a client in another country. The master services agreement asks for proof of professional indemnity cover of USD 5 million, and your broker emails the certificate the next morning. Most firms stop checking there. Yet many cross-border coverage gaps sit in that certificate, in two clauses almost nobody reads: the territorial limit and the jurisdiction clause.
Mistake one: treating territory and jurisdiction as the same thing
Professional indemnity territorial limits set where the work, or the negligent act, has to take place for the policy to respond. The jurisdiction clause sets where a claim can be brought, or a judgment obtained, and still be covered. They're separate tests, and a claim has to pass both. Say a 30-person Indian IT services firm has a policy with worldwide territory and India-only jurisdiction. It builds a payments integration for a client in Germany, and the client sues in a German court. The work met the territory test. The lawsuit fails the jurisdiction test, so the insurer can decline the claim.
What to do instead: ask your broker to confirm both clauses in writing for each contract you sign. The courts named in the contract's governing-law and dispute-resolution clauses must fall inside your jurisdiction wording. Also check whether an arbitration award counts as a covered judgment. Many cross-border contracts send disputes to arbitration in London, Singapore or Dubai.
Mistake two: assuming "worldwide" means worldwide
Plenty of policies are sold as worldwide and then qualified further down. Typical versions are "worldwide excluding USA and Canada," "worldwide, but only actions brought in the courts of [home country]," and "worldwide in respect of work performed from [home country] offices." The last one catches firms that send consultants to work on site abroad.
| Wording you'll see | What it usually means in practice | Who it suits |
|---|---|---|
| Home country territory and jurisdiction | Covers only domestic work and domestic lawsuits | Firms with no foreign clients at all |
| Worldwide territory, home jurisdiction | Covers work anywhere, but only lawsuits in your home courts | Exporters whose contracts are governed by home-country law |
| Worldwide excluding USA/Canada | Covers most foreign lawsuits, but none brought in North America | Firms selling into Europe, Asia, the Middle East and Africa |
| Full worldwide jurisdiction | Covers lawsuits brought anywhere, North America included | Firms with any North American revenue or North American-governed contracts |
What to do instead: read the definitions section of the policy, not the schedule summary. If your contracts span more than one country, aim for worldwide jurisdiction as the default. Buy something narrower only after you've confirmed your contracts can't take you outside it.
The North America Exclusion That Follows You Into Non-US Contracts
Mistake three: thinking you have no North American exposure because you have no North American clients
Insurers outside North America often attach a PI insurance North America exclusion, or a heavily reduced limit, because defense costs and damages awards in US and Canadian courts usually run far higher than in most other markets. Firms accept it because they don't sell there. But exposure gets in through routes that have nothing to do with where your client is based:
- Your client is the UK or Singapore subsidiary of a US parent, and the parent sues in its home courts after a group-wide outage.
- The contract is governed by New York or Delaware law. That's common in technology and financial services agreements, even between two non-US parties.
- Your software or deliverable reaches North American end users, and a third party there brings the claim.
- Someone seeks to enforce a US or Canadian judgment elsewhere. Many exclusions are worded to catch this too.
What to do instead: go through your client list and contract templates looking for North American parents, governing law and end users, not only billing addresses. If any show up, get a quote to remove the exclusion, or at least a North America sublimit that matches your largest relevant contract. Expect a real price difference. As a typical 2026 market range, for a small consultancy or IT firm buying USD 1–2 million in limits, adding full US/Canada jurisdiction can raise the premium by anywhere from roughly a third to more than double. The loading depends on how much revenue is North American and what services you provide. Pricing varies widely by insurer, country and contract, so confirm it with your broker before treating any figure as a budget.
A standalone tech E&O policy for international clients, written by a carrier with a North American presence, can sometimes cost less than loading a domestic PI policy. That's more likely when North American work is a large share of revenue. Get both quotes.
Admitted vs Non-Admitted Insurance: When Your Home Policy Isn't Legal Locally
Mistake four: covering a foreign entity or local risk with a policy that isn't allowed there
The admitted vs non-admitted insurance question usually comes up when a firm opens an office, registers a branch or hires local staff abroad. An admitted policy is issued by an insurer licensed in that country. A non-admitted policy is issued from outside. The rules differ a lot by country:
- European Economic Area: an insurer authorized in one member state can generally write risks in the others under freedom-of-services rules. Since Brexit, UK insurers have relied on EU-based subsidiaries or partners to write EU risks.
- Brazil, China, India and several other markets: local law has historically restricted non-admitted cover of local risks, with limited exceptions. In practice a local policy is usually needed.
- Gulf states and parts of Southeast Asia, Latin America and Africa: rules range from local placement requirements to more flexible regimes. Some depend on the type of insured or the size of the risk.
A non-admitted policy that breaches local rules causes real problems. The insurer may be unable to pay a claim locally. Tax authorities may treat claim payments as taxable income or disallow premium deductions. Local premium taxes also apply and vary considerably by country and line of business. If they go unpaid, the liability can land on you.
What to do instead: once you have a legal entity or significant operation abroad, ask for a controlled master program. That means a global policy issued in your home country, with locally admitted policies where required, plus difference-in-conditions and difference-in-limits cover that tops the local policies up to the master wording. Large carriers with international networks, such as AIG, Chubb, Zurich, Allianz, AXA XL and Tokio Marine HCC, generally offer this. For firms with only one or two overseas offices, buying a local PI policy in each country and folding it into your broker's renewal schedule is often cheaper.
Currency Mismatches and Contract Promises the Policy Won't Keep
Mistake five: buying limits in one currency to meet obligations in another
Say a South African consultancy holds a ZAR 20 million PI limit and signs a contract requiring USD 2 million of cover. When the policy is bound, the limit may comfortably exceed the requirement. A large exchange-rate move during a twelve-month policy period can leave it below the contractual minimum. That's a breach of contract before any claim is made. And if defense costs sit inside the limit, the cover left for damages shrinks further.
What to do instead: where most of your contract value is foreign, denominate the limit in the currency of your largest contracts, usually USD or EUR. Otherwise, buy enough headroom in your home currency to absorb a realistic swing. Check whether the deductible is fixed in a foreign currency, because your share of each claim can rise with it. Also ask whether defense costs are inside or outside the limit.
Mistake six: signing indemnities and insurance clauses your policy excludes
Cross-border MSAs often contain uncapped indemnities, liquidated damages, service-credit regimes and requirements to name the client as an additional insured. Most PI and tech E&O policies exclude liability you take on by contract beyond what you'd owe at law anyway. Many can't add a client as an insured at all. Watch also for "any one claim" versus "in the aggregate." A client asking for USD 5 million any one claim isn't satisfied by a USD 5 million aggregate limit shared across every client you have.
What to do instead: before signing, send the insurance and liability clauses to your broker and, for material contracts, to a contracts lawyer qualified in the governing law. Negotiate a liability cap tied to fees or to your policy limit, strike uncapped indemnities, and replace "additional insured" with "evidence of insurance." Then make sure the certificate you issue states the basis of the limit accurately.
Telling Your Insurer You've Gone Global, and a Pre-Signing Check
Mistake seven: expanding mid-term without disclosure, and leaving new entities off the policy
Proposal forms ask for revenue split by geography for a reason. Under the UK's duty of fair presentation and similar disclosure or good-faith rules in many other markets, a material change such as a large new North American client or a new overseas subsidiary may have to be disclosed. Depending on the wording and local law, failing to do so can reduce or void cover. Separately, a newly formed subsidiary, an acquired company or a contracted delivery partner abroad often isn't automatically an insured. Some policies cover new subsidiaries only below a revenue threshold or for a limited period.
What to do instead: tell your broker about material foreign contracts and new entities when they happen, not at renewal. Get written confirmation that each entity is named or falls within the automatic-acquisition clause. Require subcontractors to carry their own PI cover, with limits and jurisdiction that match your client contract.
A five-point check before you sign the next cross-border contract
- Jurisdiction: do the governing-law and dispute-resolution venues fall within your jurisdiction clause, arbitration included?
- North America: is there any North American parent, governing law or end user, and if so, is there an exclusion?
- Local admission: do you have a legal entity or local staff in a country that requires admitted cover?
- Currency and limit basis: does the limit meet the contract in its currency, on an any-one-claim basis, after a plausible exchange-rate move?
- Contract terms: are the indemnities, caps and insured-party requests consistent with what the policy actually covers?
The decision rule: if a contract fails any of the five checks, don't sign until your broker has confirmed the fix in writing or you've renegotiated the clause. Coverage depends on your policy wording and local law, so take final calls with a licensed broker and, for contract terms, qualified legal counsel in the relevant jurisdiction.
Frequently asked questions
What is the difference between territorial limits and jurisdiction in a professional indemnity policy?
Territorial limits set where the work or negligent act has to happen for cover to apply. Jurisdiction sets where a lawsuit can be brought, or a judgment obtained, and still be covered. A claim generally has to meet both, so a policy with worldwide territory can still decline a lawsuit filed in a foreign court if jurisdiction is limited to your home country.
Do I need to remove the North America exclusion if I have no US or Canadian clients?
Not necessarily, but check first. North American exposure can come from a client's US parent company, contracts governed by US state law, or North American end users of your deliverables. If any of those apply, get a quote for full jurisdiction or a North America sublimit sized to your largest relevant contract.
Can my home-country policy cover my new overseas subsidiary?
It depends on the country. Within the European Economic Area, cross-border cover is generally allowed under freedom-of-services rules, while countries such as Brazil, China and India have historically required locally admitted policies for local risks. A licensed broker with an international network can tell you whether you need a local policy or a controlled master program.
How much more does worldwide jurisdiction professional indemnity cost?
For smaller consultancies and IT firms, adding full US and Canada jurisdiction can raise the premium from roughly a third to more than double, as a typical 2026 market range. Your revenue mix, services and claims history drive the figure. Pricing varies by insurer, country and contract, so get quotes before budgeting.
Should my professional indemnity limit be in USD if my clients pay in USD?
If most of your contract value and contractual insurance requirements are in USD, a USD-denominated limit avoids currency shortfalls during the policy year. If you keep a home-currency limit, build in enough headroom to absorb a realistic exchange-rate move. Also check whether defense costs sit inside the limit.
Written by the Sentinel Underwrite Ops editorial team. Prices, features and rules change often - confirm details with the vendor or a licensed professional before you decide.